Nissan Rogue manuals

Nissan Rogue Owners Manual: Monitor, climate, audio, phone and voice recognition systems

Nissan Rogue Owners Manual / Monitor, climate, audio, phone and voice recognition systems

WARNING
  •  Positioning of the heating or air conditioning controls and display controls should not be done while driving in order that full attention may be given to the driving operation.
  •  Do not disassemble or modify this system.

    If you do, it may result in accidents, fire, or electrical shock.

  •  Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock.
  •  In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell coming from it, stop using the system immediately and contact your nearest NISSAN dealer. Ignoring such conditions may lead to accidents, fire or electrical shock.
Outside mirrors
Outside mirrors The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch 1 to select the right or left mirror. Adjust ...

Control panel buttons — color screen with Navigation System (if so equipped)
Control panel buttons — color screen with Navigation System MAP button*  Display screen   button**   button   (brightness control) button   BACK button ...

Other materials:

P0171 fuel injection system function
DTC Description DTC DETECTION LOGIC With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the A/F sensors 1. The ECM calculates the necessary compensation to corr ...

Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat belt pre-tensioner" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the ...

Power supply and ground circuit
Diagnosis Procedure 1.CHECK FUSE Check that the following fuse is not fusing. Is the fuse fusing? YES >> Replace the fuse after repairing the applicable circuit. NO >> GO TO 2. 2.CHECK GROUND CONNECTION  Turn ignition switch OFF.  Check ground connection E9 or E ...

© 2014-2026 Copyright t32.nirogue.com