Nissan Rogue manuals

Nissan Rogue Owners Manual: Voice commands

Voice commands can be used to operate the Bluetooth® Hands-Free Phone System. Press the button and say “Phone” to bring up the phone command menu. The available options are:

“Call”

For additional information on the “Call” command, refer to “Making a call” in this section.

“Phonebook” The following commands are available under

“Phonebook”:

“Recent Calls”

The following commands are available under “Recent Calls”:

“Messaging”

Speak this command to access text messaging functions. For additional information on these commands, refer to “Text messaging” in this section.

“Show Applications”

Speak this command to display list of smartphone apps available.

NOTE: Compatible smartphone and registration necessary to access applications. For additional information, refer to “Nissan- ConnectSM with Mobile Apps” in this section.

“Select Phone or Device”

Speak this command to select a phone to use from a list of those phones connected to the vehicle.

Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. To connect a phone to the Blue ...

Making a call
To make a call from a phone connected to the vehicle’s Bluetooth® Hands-Free Phone System:  Press the button.  The system will prompt you for a command. Say “Call”.   ...

Other materials:

Inspection and adjustment
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description When replacing the occupant classification system control unit, perform zero point reset procedure. Refer to SRC-42, "ZERO POINT RESET : Special Repair Requirement". When ...

Consult/gst checking system
Description NOTE: This vehicle is diagnosed using the CONSULT-III plus.  When CONSULT is connected with a data link connector equipped on the vehicle side, it will communicate with the control unit equipped in the vehicle and then enable various kinds of diagnostic tests. Ho ...

The oil pressure warning continues displaying, or does not display
Description The low oil pressure warning message stays on when oil pressure is normal.  The low oil pressure warning message stays off when oil pressure is low. Diagnosis Procedure 1.CHECK COMBINATION METER INPUT  Start the engine and select “METER/M&A” on CONSU ...

© 2014-2026 Copyright t32.nirogue.com