Nissan Rogue manuals

Nissan Rogue Owners Manual: Steering wheel switch for audio control

SOURCE select switch

With the ignition switch in the ACC or ON position, push the SOURCE switch to turn the audio system on.

Push the source select switch to change the mode in the following sequence:

AM→FM1→FM2→SXM1 (satellite radio, if so equipped) → SXM2 (satellite radio, if so equipped)→ SXM3 (satellite radio, if so equipped) → CD*→USB/iPod®*→Bluetooth® Audio*→Audio App*→ AUX* → AM.

* These modes are only available when compatible media storage is inserted into the device or connected to the system.

Volume control switch

Push the volume control switch to increase or decrease the volume.

Menu control switch/ENTER button

While the display is showing a map or audio screen, tilt the Menu Control switch upward or downward to select a station, track, CD or folder.

For most audio sources, tilting the switch up/down for more than 1.5 seconds provides a different function than a tilting up/down for less than 1.5 seconds.

M and FM

SXM (if so equipped)

iPod®

CD

USB

Bluetooth® Audio

AUX

Antenna

The antenna cannot be shortened, but can be removed. When you need to remove the antenna, turn the antenna rod counterclockwise.

To install the antenna rod, turn the antenna rod clockwise and hand tighten.

CAUTION
  •  Always properly tighten the antenna rod during installation or the antenna rod may break during vehicle operation.
  •  Be sure that the antenna is removed before the vehicle enters an automatic car wash.
  •  Be sure to fold down the antenna before the vehicle enters a garage with a low ceiling.
CD care and cleaning
Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc.  Always place the discs in the storage case when they are not being used.  To clean a disc ...

NissanConnectSM with Mobile Apps (if so equipped)
This vehicle is equipped with Smartphone Integration technology. This allows many compatible Smartphone applications to be displayed and easily controlled through the vehicle’s touchscreen. NO ...

Other materials:

Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions:  Controls brake pressure to reduce wheel slip on 1 slipping drive wheel so power is t ...

NISSAN Jackknife key (if so equipped)
Replace the battery in the jackknife key as follows: Hold jackknife key button side up. Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part. Use a cloth to protect the casing.  Remove old battery.  Replace t ...

Warning and indicator lights
Red light Brake warning light — alerts the driver to a potential issue with the Nissan Rogue’s braking system or low brake fluid. Charge warning light — indicates a problem with the charging system or alternator. Electric shift control system warning light — shows a malfunction r ...

© 2014-2025 Copyright t32.nirogue.com