Nissan Rogue Owners Manual: Operating tips

Nissan Rogue Owners Manual / Monitor, climate, audio, phone and voice recognition systems / Around View® Monitor (if so equipped) / Operating tips

CAUTION

Do not use alcohol, benzine or thinner to clean the camera. This will cause discoloration. To clean the camera, wipe with a cloth dampened with a diluted mild cleaning agent and then wipe with a dry cloth.
Do not damage the camera as the monitor screen may be adversely affected.

The screen displayed on the Around View Monitor will automatically return to the previous screen 3 minutes after the CAMERA button has been pressed with the shift lever in a position other than the R (Reverse) position.
When the view is switched, the display images on the screen may be displayed in some delay.
When the temperature is extremely high or low, the screen may not display objects clearly. This is not a malfunction.
When strong light directly shines on the camera, objects may not be displayed clearly. This is not a malfunction.
The screen may flicker under fluorescent light. This is not a malfunction.
The colors of objects on the Around View Monitor may differ somewhat from the actual color of objects. This is not a malfunction.
Objects on the Around View Monitor may not be clear and the color of the object may differ in a dark environment. This is not a malfunction.
There may be differences in sharpness between each camera view of the bird’s-eye view.
If dirt, rain or snow accumulates on the camera, the Around View Monitor may not display objects clearly. Clean the camera.
Do not use wax on the camera lens. Wipe off any wax with a clean cloth that has been dampened with a mild detergent diluted with water.

Moving Object Detection (MOD) (if so equipped)

The MOD system can inform the driver of moving objects behind the vehicle when backing out of garages, maneuvering in parking lots and in other such instances. The MOD system detects moving obje ...

Vents

Side Adjust air flow direction by moving the vent slides. Open or close the vents by using the dial. Move the dial toward the to open the vents or toward the to close them. Center Re ...

Other materials:

Low tire pressure warning lamp
Component Function Check 1.CHECK THE ILLUMINATION OF THE LOW TIRE PRESSURE WARNING LAMP Check that the low tire pressure warning lamp is turned OFF after illuminating for approximately 1 second, when the ignition switch is turned ON. Is the inspection result normal? YES >> Inspection ...

Luggage room lamp
Removal and Installation REMOVAL Insert a suitable tool (A) into the gap between the luggage lower finisher (RH) (2) and the top of luggage room lamp (1) to release the pawl. : Pawl Disconnect the harness connector from the luggage room lamp and remove. INSTALLATION Installati ...

Wiring diagram
TIRE PRESSURE MONITORING SYSTEM Wiring Diagram ...