To access the vehicle phonebook:
button on
the control panel.NOTE: To scroll quickly through the list, touch the “A-Z� key in the upper right corner of the screen. Turn the TUNE/SCROLL knob to choose a letter or number and then press ENTER. The list will move to the first entry that begins with that number or letter.
Making a call
To make a call, follow the procedure below:
button on
the control panel.The “Phone� screen will appear on the display.
�: Input the phone
number manually
using a keypad displayed on the screen. For
additional information on how to use the
touch-screen, refer to “How to use the
touch-screen� in this sectionReceiving a call
When a call is placed to the connected phone, the display will change to phone mode.
To accept the incoming call, either:
button on
the steering
wheel, or
icon on
the screen.To reject the incoming call, either:
button on
the steering
wheel, orDuring a call
While a call is active, the following options are available on the screen:
Select again to unmute the microphone.
) iconEnding a call
To end a phone call, select the red phone (
)
icon on the screen or press the
button
on
the steering wheel.
Connecting Procedure
Text messagingU1040 ENG comm circuit
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
U1040
ENG COMM CIRCUIT
(Engine communication circuit)
ECM cannot transmit a communication signal to generator.
POSSIBLE CAUSE
Harne ...
ECU diagnosis information
A/C AUTO AMP.
Reference Value
VALUES ON THE DIAGNOSIS TOOL
TERMINAL LAYOUT
PHYSICAL VALUES
DTC Inspection Priority Chart
If some DTCs are displayed at the same time, perform inspections one by one
based on the following priority
chart.
Priority
Det ...
Voice commands
You can use voice commands to operate various
Bluetooth® Hands-Free Phone System features
using the NISSAN Voice Recognition system. For
additional information, refer to “NISSAN Voice
Recognition System� in this section.
Voice Prompt Interrupt
While using the Voice Recognition system, the ...