Nissan Rogue manuals

Nissan Rogue Service Manual: Removal and installation

Periodic maintenance
CVT FLUID Inspection FLUID LEAKAGE  Check transaxle surrounding area (oil seal and plug etc.)for fluid leakage.  If anything is found, repair or replace damaged parts and adjust ...

CVT shift selector
Exploded View Shift selector knob Lock pin  Shift selector assembly Control cable Shift selector knob cover Front Removal and installation REMOVAL Apply the parking b ...

Other materials:

P0172 fuel injection system function
DTC Description DTC DETECTION LOGIC With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the A/F sensors 1. The ECM calculates the necessary compensation to corr ...

Symptom diagnosis
ENGINE DOES NOT START WHEN INTELLIGENT KEY IS INSIDE OF VEHICLE Description Engine does not start when push-button ignition switch is pressed while carrying Intelligent Key. NOTE:  Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnos ...

ECU diagnosis information
BCM Reference Value NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read T ...

© 2014-2026 Copyright t32.nirogue.com