Nissan Rogue Service Manual: Charging System

Removal and installation

BCM (BODY CONTROL MODULE) Removal and Installation For removal and installation of the BCM (Body Control Module), refer to BCS-75, "Removal and Installation". PUSH-BUTTON IGNITION SWITC ...

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Other materials:

Recommended fluids/lubricants and capacities
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity.   Capacity (Approximate) Recommended F ...

Periodic maintenance
HEADLAMP AIMING ADJUSTMENT Inspection PREPARATION BEFORE ADJUSTING Before performing aiming adjustment, check the following:  Make sure all tires are inflated to correct pressure.  Place vehicle and screen on level surface.  Make sure there is no load in vehicle other than ...

Glove box assembly and housing
Removal and Installation REMOVAL  Release instrument side finisher (RH) (1) pawls using a suitable tool and remove. : Pawl NOTE: LH side shown; RH similar. Release the glove box damper (1) from the glove box assembly (2) as shown. Release the glove box assembly pawls ...