Nissan Rogue Service Manual: Removal and installation

Periodic maintenance

FUEL SYSTEM Inspection Inspect fuel lines, fuel filler cap, and fuel tank for improper attachment, leaks, cracks, damage, loose connections, chafing or deterioration. (A) : Engine (B) : Fuel ...

Fuel level sensor unit, fuel filter and fuel pump assembly

Exploded View 1. Lock ring 2. O-ring 3. Fuel filter and fuel pump assembly 4. Fuel level sensor and fuel tank temperature sensor 5. Lock ring 6. O-ring 7. Sub fuel level sensor assembly ...

Other materials:

C1716, C1717, C1718, C1719 transmitter (pressure data)
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

Primary speed sensor
Exploded View Transaxle assembly O-ring Primary speed sensor : Always replace after every disassembly. : N·m (kg-m, in-lb) : Apply CVT fluid Removal and Installation REMOVAL  Remove the engine undercover. Refer to EXT-37, "ENGINE UNDER COVER : Removal and Ins ...

Idle air volume learning
Description Idle Air Volume Learning is a function of ECM to learn the idle air volume that keeps each engine idle speed within the specific range. It must be performed under any of the following conditions: Each time electric throttle control actuator or ECM is replaced.  Idle spee ...