Nissan Rogue Service Manual: Basic inspection

Symptom diagnosis

NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts. ×: Applicabl ...

Brake pedal

Inspection BRAKE PEDAL HEIGHT Check the brake pedal height (H) between the dash lower panel (3) and the brake pedal upper surface. CAUTION: Check the brake pedal height with the floor trim remov ...

Other materials:

Basic inspection
CONFIGURATION (CAN GATEWAY) Work Procedure 1.WRITING MODE SELECTION CONSULT Configuration Select “Re/programming, Configuration” of CAN gateway. When writing saved data>>GO TO 2. When writing manually>>GO TO 3. 2.PERFORM “AFTER REPLACE ECU” OF “READ / WRITE CONFIGURA ...

Operating range
Operating range The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range. When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating ...

Combination meter
Reference Value VALUES ON THE DIAGNOSIS TOOL *: DDS (hill descent control) NOTE: Some items are not available according to vehicle specification. TERMINAL LAYOUT PHYSICAL VALUES Fail-safe The combination meter activates the fail-safe control if the CAN communica ...