Nissan Rogue Service Manual: Wiring diagram

ECU diagnosis information

AV CONTROL UNIT Reference Value VALUES ON THE DIAGNOSIS TOOL TERMINAL LAYOUT PHYSICAL VALUES DTC Index BOSE SPEAKER AMP Reference Value TERMINAL LAYOUT PHYSICAL ...

Basic inspection

DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the envi ...

Other materials:

Intermittent incident
DESCRIPTION Sometimes the symptom is not present when the vehicle is brought in for service. If possible, re-create the conditions present at the time of the incident. Doing so may help avoid a No Trouble Found Diagnosis. The following section illustrates ways to simulate the conditions/envi ...

P0962 pressure control solenoid A
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0962 PC SOLENOID A (Pressure Control Solenoid A Control Circuit Low) When all of the following conditions are satisfied and this state is maint ...

Additional service when replacing ECM
Description When replacing ECM, the following procedure must be performed. (For details, refer to EC-136, "Work Procedure".) PROGRAMMING OPERATION NOTE: After replacing with a blank ECM, programming is required to write ECM information. Be sure to follow the procedure to perform t ...