Nissan Rogue Service Manual: Wiring diagram

Preparation

Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description — (J-39570) Chass ...

Power seat for driver side

Wiring Diagram ...

Other materials:

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE:  If DTC B1610 is displayed with DTC U1000, fi ...

Parking brake switch signal circuit
Component Function Check 1.CHECK PARKING BRAKE SWITCH OPERATION Check that brake warning lamp in combination meter turns ON/OFF when parking brake is actuated. Is the inspection result normal? YES >> Inspection End. NO >> Proceed to diagnosis procedure. Refer to WCS-45, " ...

Periodic maintenance
REAR WHEEL HUB AND HOUSING Inspection INSPECTION Make sure the conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal. WHEEL HUB AND BEARING INSPECTION  Move wheel hub and bearing in the axial direction by hand. Make sure there is no ...