Nissan Rogue Service Manual: Tightening torque of standard bolts
Description
This vehicle has both new standard based on ISO* and previous standard bolts/nuts. There are some differences between these two types of bolts/ nuts; shape of the head, grade of strength, hexagonal width across flats and the standard tightening torque.
- For guidance in discriminating, refer to GI-19, "Tightening Torque Table (New Standard Included)".
- If the tightening torque is not described in the description or figure, refer to GI-19, "Tightening Torque Table (New Standard Included)".
*ISO: International Organization for Standardization
Abbreviations
Abbreviation List
The following ABBREVIATIONS are used:
...
Tightening Torque Table (New Standard Included)
CAUTION:
The special parts are excluded.
The bolts/nuts in these tables have a strength (discrimination)
number/symbol assigned to the head
or the like. As to the relation betwe ...
Other materials:
Heating and cooling unit assembly
Exploded View
Steering Member
Heating and cooling unit assembly
Steering member
Bolt
Nut
Automatic Air Conditioning
Wiring harness
Air mix door duct (LH)
Air mix door duct (RH)
Intake housing gasket
Blower motor
Front foot duct (RH)
...
C1113, C1145, C1146 yaw rate/side/decel G sensor
DTC
Display Item
Malfunction detected condition
Possible causes
C1113
G SENSOR
When a malfunction is detected in longitudinal G sensor
signal.
Harness or connector
Yaw rate/side/decel G sensor
• ABS actuator and electric unit
(control ...
Symptom diagnosis
DRIVER ASSISTANCE SYSTEM SYMPTOMS
Symptom Table
LANE DEPARTURE WARNING SYSTEM SYMPTOMS
NOTE:
Refer to the following the operation condition of the Lane Departure Warning
system.
Lane Departure Warning system: DAS-16, "LDW : System
Description".
BLIND SPOT WARNING ...
