Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Cruise control / Driver Assistance System / Driver assistance system / Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name		Description
— (J-46534) Trim Tool Set		Removing trim components
— (1-20-2721-1-IF) Distance Sensor Alignment Kit		Adjusting distance sensor
— (1-20-2722-1-IF) Wheel Adapter		Adjusting distance sensor
— (J-50808) Distance Sensor Alignment Attachment Board		Adjusting distance sensor

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description

COMPONENT PARTS Component Parts Location View with back door finisher removed View with glove box assembly removed View with front bumper removed View with front bumper remo ...

Other materials:

DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT AUDIO UNIT AUDIO UNIT : Diagnosis Procedure Regarding Wiring Diagram information, refer to AV-27, "Wiring Diagram". 1.CHECK FUSE Check that the following fuses are not blown. Are the fuses blown? YES >> Replace the blown fuse after repairing t ...

C1716, C1717, C1718, C1719 transmitter (pressure data)
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the TPMS sensor Read TPMS DTC ...

Front disc brake
Brake Burnishing CAUTION: Burnish contact surfaces between brake pads and disc brake rotor according to the following procedure after refinishing the disc brake rotor, replacing brake pads or if a soft pedal occurs at very low mileage. Be careful of vehicle speed. Brakes ...