Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those tools illustrated here.

Tool number (TechMate No.) Tool nam

Description

— (J-50190) Signal Tech II

  • Activate and display TPMS transmitter IDs
  •  Display tire pressure reported by the TPMS transmitter
  •  Read TPMS DTCs
  •  Register TPMS transmitter IDs
  •  Check Intelligent Key relative signal strength
  •  Confirm vehicle Intelligent Key antenna signal strength
  •  Compatible with future sensors
  •  Equipped with a display
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
COMPONENT PARTS BODY CONTROL SYSTEM BODY CONTROL SYSTEM : Component Parts Location BCM Behind instrument panel (LH) POWER CONSUMPTION CONTROL SYSTEM POWER CONSUMPTION CONTROL SYSTEM : ...

Other materials:

Unit removal and installation
TRANSFER ASSEMBLY Exploded View 1 Transfer assembly : N·m (kg-m, ft-lb) *: Apply anti-corrosion oil. Removal and Installation NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling. REMOVAL  Remove front drive shaf ...

Unbalance steering wheel turning force (torque variation)
Description Unbalance steering wheel turning force (torque variation). Diagnosis Procedure 1.PERFORM SELF-DIAGNOSIS With CONSULT  Turn the ignition switch OFF to ON.  Perform “EPS” self-diagnosis. Is any DTC detected? YES >> Check the DTC. Refer to STC-13, "DTC ...

Steering angle sensor
Exploded View Combination switch Steering angle sensor Spiral cable Removal and Installation Removal and Installation  Remove the spiral cable. Refer to SR-15, "Exploded View".  Remove screws (A) and then remove steering angle sensor (1). INSTALLATI ...

© 2014-2026 Copyright t32.nirogue.com