Rearview mirror (if so equipped)

Rearview mirror (if so equipped)
Use the night position 1 to reduce glare from the headlights of vehicles behind you at night.
Use the day position 2 when driving in daylight hours.
| WARNING Use the night position only when necessary, because it reduces rear view clarity. |
Sun visors
Automatic Anti-glare rearview mirror
(if so equipped)Meter buzzer circuit
Description
The buzzer for the warning chime system is installed in the combination
meter.
The combination meter sounds the buzzer based on the signals transmitted
from various units.
Component Function Check
1. CHECK OPERATION OF METER BUZZER
Select "BUZZER" of & ...
Steering wheel
Exploded View
Steering wheel
Removal and Installation
REMOVAL
Set the front wheels and tires in the straight-ahead position.
Remove driver air bag module. Refer to SR-12, "Removal and
Installation"
Remove steering wheel bolt.
Disconnect harn ...
VDC off switch
Component Function Check
1.CHECK VDC OFF SWITCH OPERATION
Check that VDC OFF indicator lamp in combination meter turns ON/OFF when VDC
OFF switch is operated.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Proceed to BRC-117, "Diagnosis Procedure".
Diagn ...