Nissan Rogue Service Manual: DTC/circuit diagnosis

Basic inspection

DIAGNOSIS AND REPAIR WORKFLOW Work Flow (With GR8-1200 NI) STARTING SYSTEM DIAGNOSIS WITH GR8-1200 NI To test the starting system, use the following special service tool:  GR8-1200 NI Mult ...

B terminal circuit

Description Terminal “B” is constantly supplied with battery power. Diagnosis Procedure Regarding Wiring Diagram information, refer to STR-7, "Wiring Diagram". CAUTION: Perform diag ...

Other materials:

P0139 HO2S2
DTC Description DTC DETECTION LOGIC The heated oxygen sensor 2 has a much longer switching time between rich and lean than the air fuel ratio (A/F) sensor 1. The oxygen storage capacity of the three way catalyst 1 causes the longer switching time. To judge the malfunctions of heated oxygen sens ...

Radio
With the ignition placed in the ACC or ON position, press the or POWER button/VOLUME control knob to turn the radio on. If you listen to the radio with the engine not running, the ignition should be placed in the ACC position. Radio reception is affected by station signal strength, distance ...

Corrosion protection
Description To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in NISSAN production plants. When repairing or replacing body panels, it is necessary to use the same anti-corrosive measures. ANTI-CORROSIVE PRECOATED STEEL (GALVANNEALED STEEL) ...