Nissan Rogue Service Manual: The oil pressure warning continues displaying, or does not display
Description
- The low oil pressure warning message stays on when oil pressure is normal.
- The low oil pressure warning message stays off when oil pressure is low.
Diagnosis Procedure
1.CHECK COMBINATION METER INPUT
- Start the engine and select “METER/M&A” on CONSULT.
- Observe “OIL W/L” in “Data Monitor” and the operation of the low oil pressure warning message in the information display.
Is the inspection result normal? YES >> Perform “Self Diagnosis” of “ECM”. Refer to EC-67, "CONSULT Function".
NO >> Replace combination meter. Refer to MWI-82, "Removal and Installation".
The fuel gauge does not move
Description
Fuel gauge does not move from a certain position.
Diagnosis Procedure
1.CONDUCTING THE COMBINATION METER SELF-DIAGNOSIS MODE
Perform the self-diagnosis mode of combination meter, and t ...
The parking brake release warning continues displaying,
or does not display
Description
The parking brake warning is displayed during vehicle travel even though
the parking brake is released.
The parking brake warning is not displayed even though driving the
...
Other materials:
U1010 control unit (CAN)
Description
Initial diagnosis of combination meter.
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT
Detection Condition
Possible Cause
U1010
CONTROL UNIT (CAN)
[U1010]
When detecting error during the initial diagnosis of the CAN
controller
of co ...
P0011 IVT control
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P0011
INT/V TIM CONT-B1
(″A″ Camshaft position - timing over-advanced
or system performance bank 1)
There is a gap between angle of ...
DTC/circuit diagnosis
U1000 CAN COMM CIRCUIT
Description
CAN (Controller Area Network) is a serial communication system for real time
application. It is an on-vehicle
multiplex communication system with high data communication speed and excellent
error detection ability.
Many electronic control units are equipp ...
