Nissan Rogue Service Manual: Removal and installation
POWER SOCKET
Removal and Installation
FRONT POWER SOCKET
Removal
- Remove cluster lid C. Refer to IP-21, "Removal and Installation".
- Release the pawls on the power socket and remove from the cluster lid C.
Installation
Installation is in the reverse order of removal.
CONSOLE POWER SOCKET
Removal
- Remove center console assembly. Refer to IP-18, "Removal and Installation".
- Release the pawls on the console power socket and remove from the center console.
Installation
Installation is in the reverse order of removal.
REAR CARGO POWER SOCKET
Removal
- Remove luggage side lower finisher RH. Refer to INT-34, "LUGGAGE SIDE LOWER FINISHER : Removal and Installation - With Third Row Seat".
- Release the pawls on the rear cargo power socket and remove from the luggage side lower finisher RH.
Installation
Installation is in the reverse order of removal.
Wiring diagram
POWER SOCKET
Wiring Diagram
...
Service data and specifications (SDS)
Power Socket
...
Other materials:
Main power window and door lock/unlock switch
Removal and Installation
REMOVAL
Remove the front door pull handle bracket (LH). Refer to INT-15,
"Removal and Installation".
Release pawls using a suitable tool (A) and remove main power
window and door lock/unlock switch finisher (1).
: Pawl
Disconnect t ...
Crash zone sensor
Exploded View
Crash zone sensor
Crash zone sensor harness
connector
Bracket
Removal and Installation
WARNING:
Before servicing the SRS, turn ignition switch OFF, disconnect
both battery terminals then wait at
least three minutes.
Do not use a ...
Diagnosis system (BCM)
WITH INTELLIGENT KEY
WITH INTELLIGENT KEY : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self D ...
