Nissan Rogue Service Manual: Removal and installation

Power window lock switch does not function

Diagnosis Procedure 1.REPLACE MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH Replace main power window and door lock/unlock switch. >> Refer to PWC-65, "Removal and Installation". ...

Main power window and door lock/unlock switch

Removal and Installation REMOVAL  Remove the front door pull handle bracket (LH). Refer to INT-15, "Removal and Installation".  Release pawls using a suitable tool (A) an ...

Other materials:

NISSAN Intelligent Key® battery discharge (if so equipped)
NISSAN Intelligent Key® battery discharge If the battery of the NISSAN Intelligent Key® is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure:  Place the shift lever in the P (Park) position. ...

Ambient sensor signal circuit
Description It detects outside air temperature and converts it into a resistance value which is then input into the combination meter. Diagnosis Procedure Regarding Wiring Diagram information, refer to MWI-32, "Wiring Diagram". 1.CHECK AMBIENT SENSOR SIGNAL CIRCUIT  Turn ig ...

P0850 PNP switch
Description Transmission range switch is turn ON when the selector lever is P or N. ECM detects the position because the continuity of the line (the ON) exists. DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition ...