Nissan Rogue Service Manual: Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
|
Tool number (TechMate No.) Tool name |
Description |
|
| KV991J0070 (J-45695-A) Coolant refill tool |
|
Refilling engine cooling system |
Commercial Service Too
|
Tool name |
Description |
|
| Power tool |
|
Loosening nuts, screws and bolts |
| Radiator cap tester |
|
Checking radiator and radiator cap |
| Radiator cap tester adapter |
|
Adapting radiator cap tester to radiator cap
and radiator pipe (upper) filler neck a: 28 (1.10) diameter Unit: mm (in) |
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...
System description
DESCRIPTION
Engine Cooling System
Thermostat
Water outlet
Cylinder block (Thermostat housing)
Water inlet
Radiator
Water pump
Cylinder block
Cylinde ...
Other materials:
Input speed sensor
Exploded View
Input speed sensor
O-ring
Transaxle assembly
: Always replace after every
disassembly.
: N·m (kg-m, in-lb)
: Apply CVT fluid
Removal and Installation
REMOVAL
Remove battery tray. Refer to TM-207, "Removal and Installation".
Remove the ...
Overdrive control switch
Component Function Check
1.CHECK O/D OFF INDICATOR LAMP FUNCTION
Check O/D OFF indicator lamp turns ON for approx. 2 seconds when ignition
switch turns ON.
Is the inspection results normal?
YES >> GO TO 2.
NO >> Go to TM-181, "Diagnosis Procedure".
2.CHECK OVERDRIVE ...
Steering gear and linkage
Inspection
BOOT
Check boot for cracks. Replace if any damage is found.
OUTER SOCKET AND INNER SOCKET
Boot
Check boot for cracks, and replace it if a malfunction is
detected.
Gear Housing
Check gear housing for damage and scratches (inner wall). Replace
if there are a ...
