Nissan Rogue Service Manual: CAN gateway

DTC/circuit diagnosis

MALFUNCTION AREA CHART Main Line Branch Line Short Circuit MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT Diagnosis Procedure 1.CHECK CONNECTOR  Turn the ignition switch OFF. Di ...

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Other materials:

Basic inspection
DIAGNOSIS AND REPAIR WORK FLO Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM  Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs).  Check operation condition of the ...

Steering gear and linkage
Inspection BOOT Check boot for cracks. Replace if any damage is found. OUTER SOCKET AND INNER SOCKET Boot  Check boot for cracks, and replace it if a malfunction is detected. Gear Housing  Check gear housing for damage and scratches (inner wall). Replace if there are a ...

Power supply and ground circuit
COMBINATION METER COMBINATION METER : Diagnosis Procedure Regarding Wiring Diagram information, refer to MWI-32, "Wiring Diagram". 1.CHECK FUSES Check that the following fuses are not blown. Is the fuse blown? YES >> Replace the blown fuse after repairing the affected circu ...