Nissan Rogue Service Manual: B2267 engine speed

Nissan Rogue Service Manual / Driver information & multimedia / Meter, Warning Lamp & Indicator / DTC/circuit diagnosis / B2267 engine speed

Description

The engine speed signal is transmitted from ECM to the combination meter with CAN communication.

DTC Logic

DTC DETECTION LOGIC

DTC	CONSULT	Detection Condition	Possible Cause
B2267	TACHO METER [B2267]	ECM continuously transmits abnormal engine speed signals for 2 seconds or more.	Crankshaft position sensor (POS) ECM

Diagnosis Procedure

1.PERFORM SELF-DIAGNOSIS OF ECM

Perform "Self-Diagnostic Result" of "ECM", and repair or replace malfunctioning parts.

>> Refer to EC-93, "DTC Index".

B2205 vehicle speed

Description Vehicle speed signal is transmitted from ABS actuator and electric unit (control unit) via CAN communication line to combination meter. DTC Logic DTC DETECTION LOGIC DTC ...

B2268 water temp

Description The engine coolant temperature signal is transmitted from ECM to the combination meter via CAN communication. DTC Logic DTC DETECTION LOGIC DTC CONSULT Detec ...

Other materials:

Starting the engine (models with NISSAN Intelligent Key® system)
Apply the parking brake. Move the shift lever to P (Park) or N (Neutral). P (Park) is recommended. The starter is designed not to operate if the shift lever is in any of the driving positions. Push the ignition switch to the ON position. Depress the brake pedal and pus ...

P0850 PNP switch
Description Transmission range switch is turn ON when the selector lever is P or N. ECM detects the position because the continuity of the line (the ON) exists. DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition ...

Water pump
Exploded View Cylinder block Water pump Water pump gasket Water pump housing O-ring Water pipe Water pump housing gasket Refer to INSTALLATION Removal and Installation REMOVAL Drain engine coolant. Refer to CO-8, "Draini ...