Nissan Rogue Owners Manual: Remote keyless entry (if so equipped)
| CAUTION Do not leave the ignition key inside the vehicle when you leave the vehicle. |
key number plate is supplied with your keys.
Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate.
A key number is only necessary when you have lost all your keys. If you still have a key, your NISSAN dealer can duplicate it.
Storing remote keyless entry
To lock or unlock the vehicle using the key press the release button 1 to unfold the key from the fob.
When storing the key press the release button 1 and push key 2 to fold the key back into fob slot 3 .
Never leave keys in vehicle.
Type A (if so equipped)
- Intelligent Key (two sets)
- Mechanical key
- Key number plate (one plate)
Type B (if so equipped)
Keys
Keys
Jackknife type key
Integrated door lock keyfob with transponder
chip
Key number plate
...
NISSAN Intelligent Key® (if so equipped)
Your vehicle can only be driven with the Intelligent
Keys which are registered to your vehicle’s Intelligent
Key system components and NISSAN Vehicle
Immobilizer System components. As many
as fo ...
Other materials:
Three-point type seat belt with retractor
WARNING
Every person who drives or rides in this
vehicle should use a seat belt at all
times.
Do not ride in a moving vehicle when
the seatback is reclined. This can be
dangerous. The shoulder belt will not
be against your body. In an accident,
you ...
P0300, P0301, P0302, P0303, P0304 misfire
DTC Description
DTC DETECTION LOGIC
When a misfire occurs, engine speed will fluctuate. If the engine speed
fluctuates enough to cause the crankshaft
position (CKP) sensor (POS) signal to vary, ECM can determine that a misfire is
occurring.
Sensor
Input signal to ECM
ECM functio ...
Preparation
PREPARATION
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
KV40107300
( — )
Boot band crimping tool
Installing boot band
KV40107500
( — )
...
