WITH MANUAL A/C
WITH MANUAL A/C : Description
WITH MANUAL A/C : Component Function Check
1. CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION
Check that the indicator lamp of the rear window defogger switch illuminates when rear window defogger switch is ON.
Is the inspection result normal? YES >> Rear window defogger switch function is OK.
NO >> Refer to DEF-22, "WITH MANUAL A/C : Diagnosis Procedure".
WITH MANUAL A/C : Diagnosis Procedure
Regarding Wiring Diagram information, refer to DEF-12, "Wiring Diagram".
1.CHECK REAR WINDOW DEFOGGER SWITCH OPERATION
With CONSULT

Is the inspection result normal? YES >> Rear window defogger switch is OK.
NO >> Replace front air control. Refer to HAC-181, "Removal and Installation".
WITH AUTO A/C
WITH AUTO A/C : Description
WITH AUTO A/C : Component Function Check
1. CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION
Check that the indicator lamp of the rear window defogger switch illuminates when rear window defogger switch is ON.
Is the inspection result normal? YES >> Rear window defogger switch function is OK.
NO >> Refer to DEF-22, "WITH MANUAL A/C : Diagnosis Procedure".
WITH AUTO A/C : Diagnosis Procedure
Regarding Wiring Diagram information, refer to DEF-12, "Wiring Diagram".
1.CHECK REAR WINDOW DEFOGGER SWITCH OPERATION
With CONSULT

Is the inspection result normal? YES >> Rear window defogger switch is OK.
NO >> Replace A/C switch. Refer to HAC-102, "Removal and Installation".
Rear window defogger relayP0744 torque converter
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0744
TORQUE CONVERTER
(Torque converter clutch circuit intermittent)
When all of the following conditions are satisfied and this state is
maintain ...
Front wiper arm
Exploded View
Front wiper blade (RH)
Front wiper arm (RH)
Front wiper arm cover
Front wiper drive assembly
Front wiper arm (LH)
Front wiper blade (LH)
Removal and Installation
REMOVAL
Move front wiper into the service position by turning the ignit ...
Preparation
Special Service Tool
The actual shape of the tools may differ from those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
KV38100500
( — )
Drift
Installing sensor rotor
a: 80 mm (3.15 in) dia.
b: 60 mm (2.36 in) dia.
KV40 ...