Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Electrical & power control / Body Control System / With intelligent key system / Preparation

Special Service Tool

The actual shape of the tools may differ from those tools illustrated here.

Tool number (TechMate No.) Tool name		Description
— (J-50190) Signal Tech II		Activate and display TPMS transmitter IDs Display tire pressure reported by the TPMS transmitter Read TPMS DTCs Register TPMS transmitter IDs Check Intelligent Key relative signal strength Confirm vehicle Intelligent Key antenna signal strength Compatible with future sensors Equipped with a display

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description

COMPONENT PARTS BODY CONTROL SYSTEM BODY CONTROL SYSTEM : Component Parts Location BCM Behind instrument panel (LH) POWER CONSUMPTION CONTROL SYSTEM POWER CONSUMPTION CONTROL SYS ...

Other materials:

Additional service when replacing transaxle assembly
Description Perform the following work after the transaxle assembly is replaced. WRITING TCM DATA TCM performs accurate control by retrieving data (inherent characteristic value) of each solenoid. For this reason, after replacing transaxle assembly, it is necessary to write new d ...

Cooler pipe and hose
Exploded View Condenser High-pressure flexible hose Low-pressure flexible hose Low-pressure pipe Heating and cooling unit assembly High-pressure pipe Compressor O-ring Low-pressure service port High-pressure service port LOW-PRESSURE PIP LOW-PRESSURE P ...

CVT oil warmer
Exploded View Transaxle assembly CVT oil warmer : N·m (kg-m, in-lb) Removal and Installation REMOVAL WARNING: Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator. Wrap a thick cloth around ...