Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description

— (J-46534) Trim Tool Set

Removing trim components
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIO ...

System description
COMPONENT PARTS Component Parts Location Right rear wheel area Instrument panel Engine compartment  Left side of instrument panel (view with trim panel removed) N ...

Other materials:

Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions:  Controls brake pressure to reduce wheel slip on 1 slipping drive wheel so power is t ...

P0967 pressure control solenoid B
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0967 PC SOLENOID B (Pressure Control Solenoid B Control Circuit High) When all of the following conditions are satisfied and this state is main ...

ECU diagnosis information
BCM Reference Value NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read T ...

© 2014-2025 Copyright t32.nirogue.com