Nissan Rogue Service Manual: Power window control system symptoms

Nissan Rogue Service Manual / Body exterior, doors, roof & vehicle security / Power Window Control System / Symptom diagnosis / Power window control system symptoms

Symptom Table

Symptom	Reference page
None of the power windows can be operated using any switch.	Refer to PWC-55, "Diagnosis Procedure".
Driver side power window alone does not operate.	Refer to PWC-56, "Diagnosis Procedure".
Front passenger side power window does not operate (with both power window main switch and front passenger side power window switch).	Refer to PWC-57, "WITH BOTH POWER WINDOW MAIN SWITCH AND FRONT PASSENGER SIDE POWER WINDOW SWITCH : Diagnosis Procedure".
Front passenger side power window does not operate (with front power window switch only).	Refer to PWC-57, "WITH FRONT POWER WINDOW SWITCH ONLY : Diagnosis Procedure".
Rear LH side power window does not operate (with both power window main switch and rear power window switch LH).	Refer to PWC-58, "WITH BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW SWITCH LH : Diagnosis Procedure".
Rear LH side power window does not operate (with rear power window switch LH only).	Refer to PWC-58, "WITH REAR POWER WINDOW SWITCH LH ONLY : Diagnosis Procedure".
Rear RH side power window does not operate (with both power window main switch and rear power window switch RH).	Refer to PWC-59, "WITH BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW SWITCH RH : Diagnosis Procedure".
Rear RH side power window does not operate (with rear power window switch RH only).	Refer to PWC-59, "WITH REAR POWER WINDOW SWITCH RH ONLY : Diagnosis Procedure".
Anti-pinch system does not operate normally (drivers side).	Refer to PWC-60, "Diagnosis Procedure".
Power window retained power operation does not operate prope	Refer to PWC-61, "Diagnosis Procedure".
Auto operation does not operate manual operate normally (driver side).	Refer to PWC-62, "Diagnosis Procedure".
Power window lock switch does not function.	Refer to PWC-63, "Diagnosis Procedure".

Symptom diagnosis

...

None of the power windows can be operated using any switch

Diagnosis Procedure 1.CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to BCS-68, "Diagnosis Procedure" (with Intelligent Key system) or BCS-12 ...

Other materials:

Power supply and ground circuit
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram". 1. CHECK FUSE Check that the following fuse is not blown. Is the fuse blown ...

Periodic maintenance
REAR PROPELLER SHAFT Inspection APPEARANCE AND NOISE Check the propeller shaft tube surface for dents or cracks. If malfunction is detected, replace propeller shaft assembly. If center bearing is noisy or damaged, replace propeller shaft assembly. VIBRATION If vibrati ...

U110f lost communication (ECM)
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U110F LOST COMM (ECM) (Lost Communication With ECM) When the ignition switch is ON, TCM is unable to receive the CAN communications signal from ...