Nissan Rogue Service Manual: Periodic maintenance

Rear disc brake

BRAKE PAD BRAKE PAD : Inspection INSPECTION Check brake pad wear thickness from an inspection hole (A) on cylinder body. Check using a scale if necessary. Wear thickness : Refer to BR-55, &qu ...

Brake pedal

Adjustment BRAKE PEDAL HEIGHT  Remove instrument lower panel LH. Refer to IP-22, "Removal and Installation".  Disconnect the harness connectors from the stop lamp switch ...

Other materials:

P0520 EOP sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0520 EOP SENSOR/SWITCH (Engine oil pressure sensor/switch circuit) Signal voltage from the EOP sensor remains at more than 5.02 V / less than ...

VIN registration
Description VIN Registration is an operation to registering VIN in ECM. It must be performed each time ECM is replaced. NOTE: Accurate VIN which is registered in ECM may be required for Inspection & Maintenance (I/M). Work Procedure 1.CHECK VIN Check the VIN of the vehicle and note it. ...

DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT AUDIO UNIT AUDIO UNIT : Diagnosis Procedure Regarding Wiring Diagram information, refer to AV-27, "Wiring Diagram". 1.CHECK FUSE Check that the following fuses are not blown. Are the fuses blown? YES >> Replace the blown fuse after repairing t ...