THE SPORT MODE INDICATOR LAMP DOES NOT TURN ON
Description
The SPORT mode indicator lamp does not turn ON when the SPORT mode switch is operated.
Diagnosis Procedure
1.CHECK SPORT MODE INDICATOR LAMP FUNCTION
Perform combination meter self-diagnosis mode and check test order 10. Refer to MWI-19, "Description".
Is the check result normal? YES >> GO TO 2.
NO >> Replace combination meter. Refer to MWI-82, "Removal and Installation".
2.CHECK DTC (TCM)
With CONSULT
Is any DTC detected? YES >> Check DTC detected item. Refer to TM-63, "DTC Index".
NO >> GO TO 3.
3.CHECK DTC (ECM)
With CONSULT
Check “Self Diagnostic Results” in “ENGINE”.
Is any DTC detected? YES >> Check DTC detected item. Refer to EC-93, "DTC Index".
NO >> GO TO 4.
4.CHECK DTC (COMBINATION METER)
With CONSULT
Check “Self Diagnostic Results” in “METER/M&A”.
Is any DTC detected? YES >> Check DTC detected item. Refer to MWI-30, "DTC Index".
NO >> GO TO 5.
5.CHECK COMBINATION METER INPUT/OUTPUT SIGNAL
With CONSULT
Is any DTC detected? YES >> Replace combination meter. Refer to MWI-82, "Removal and Installation".
NO >> GO TO 6.
6.CHECK SPORT MODE SWITCH CIRCUIT
Check SPORT mode switch circuit. Refer to DMS-13, "Diagnosis Procedure".
Is any DTC detected? YES >> INSPECTION END
NO >> Repair or replace malfunctioning parts.
DTC/circuit diagnosis
Removal and installationP0138 HO2S2
DTC Description
DTC DETECTION LOGIC
The heated oxygen sensor 2 has a much longer switching time between rich and
lean than the air fuel ratio (A/
F) sensor 1. The oxygen storage capacity of the three way catalyst (manifold)
causes the longer switching
time.
MALFUNCTION A
To judge the malfu ...
Fuel recommendation
Use unleaded regular gasoline with an octane
rating of at least 87 AKI (Anti-Knock Index) number
(Research octane number 91).
CAUTION
Only vehicles with the E-85 filler door
label can operate on E-85. Fuel system
or other damage can occur if E-85 is
used in vehicles t ...
Rear wiper auto stop signal circuit
Component Function Check
1. CHECK REAR WIPER (AUTO STOP) OPERATION
CONSULT DATA MONITOR
Select WIPER of BCM data monitor item.
Operate the rear wiper.
Check that RR WIPER STOP changes to ON and OFF linked with the
wiper operation.
Is the inspection result norma ...