Nissan Rogue Owners Manual: Fuel efficient driving tips
Follow these easy-to-use Fuel Efficient Driving
Tips to help you achieve the most fuel economy
from your vehicle.
- Use Smooth Accelerator and Brake
Pedal Application
- Avoid rapid starts and stops.
- Use smooth, gentle accelerator and
brake application whenever possible.
- Maintain constant speed while commuting
and coast whenever possible.
- Maintain Constant Speed
- Look ahead to try and anticipate and minimize
stops.
- Synchronizing your speed with traffic
lights allows you to reduce your number
of stops.
- Maintaining a steady speed can minimize
red light stops and improve fuel efficiency.
- Use Air Conditioning (A/C) at Higher
Vehicle Speeds
- Below 40 MPH (64 km/h), it is more
efficient to open windows to cool the
vehicle due to reduced engine load.
- Above 40 MPH (64 km/h), it is more
efficient to use A/C to cool the vehicle
due to increased aerodynamic drag.
- Recirculating the cool air in the cabin
when the A/C is on reduces cooling load.
- Drive at Economical Speeds and Distances
- Observing the speed limit and not exceeding
60 MPH (97 km/h) (where legally
allowed) can improve fuel efficiency
due to reduced aerodynamic drag.
- Maintaining a safe following distance behind
other vehicles reduces unnecessary
braking.
- Safely monitoring traffic to anticipate
changes in speed permits reduced braking
and smooth acceleration changes.
- Select a gear range suitable to road conditions.
- Use Cruise Control
- Using cruise control during highway driving
helps maintain a steady speed.
- Cruise control is particularly effective in
providing fuel savings when driving on flat
terrains.
- Plan for the Shortest Route
- Utilize a map or navigation system to determine
the best route to save time.
- Avoid Idling
- Shutting off your engine when safe for
stops exceeding 30–60 seconds saves
fuel and reduces emissions.
- Buy an Automated Pass for Toll Roads
- Automated passes permit drivers to use
special lanes to maintain cruising speed
through the toll and avoid stopping and
starting.
- Winter Warm Up
- Limit idling time to minimize impact to fuel
economy.
- Vehicles typically need no more than
30 seconds of idling at start-up to effectively
circulate the engine oil before driving.
- Your vehicle will reach its ideal operating
temperature more quickly while driving
versus idling.
- Keeping your Vehicle Cool
- Park your vehicle in a covered parking
area or in the shade whenever possible.
- When entering a hot vehicle, opening the
windows will help to reduce the inside
temperature faster, resulting in reduced
demand on your A/C system.
Increasing fuel economy
- Keep your engine tuned up.
- Follow the recommended scheduled maintenance.
- Keep the tires inflated to the correct pressure.
Low tire pressure increases tire wear
and lowers fuel economy.
- Keep all the wheels in correct alignment.
Improper alignment increases tire wear and
lowers fuel economy.
- Use the recommended viscosity engine oil.
For additional information, refer to “Engine
oil and oil filter recommendations� in the
“Technical and consumer information� section
of this manual.
CAUTIONDuring the first 1,200 miles (2,000 km),
follow these recommendations to obtain
maximum engine performance and ensure
the future reliability and economy of your
new vehicle. ...
4X4–I SYSTEM OPERATION
WARNING
Do not drive beyond the performance
capability of the tires. Accelerating
quickly, sharp steering maneuvers or
sudden braking may cause l ...
Other materials:
Voice commands
You can use voice commands to operate various
Bluetooth® Hands-Free Phone System features
using the NISSAN Voice Recognition system. For
additional information, refer to “NISSAN Voice
Recognition System� in this section.
Voice Prompt Interrupt
While using the Voice Recognition system, the ...
Active ride control
This system senses upper body motion (based
on wheel speed information) and controls engine
torque and four wheel brake pressure. This will
enhance ride comfort in effort to restrain uncomfortable
upper body movement when passing
over undulated road surfaces . This system
comes into effect abo ...
Instrument lower panel LH
Removal and Installation
REMOVAL
Release instrument side finisher (LH) (1) pawls using a suitable
tool and remove.
: Pawl
Remove bolts (A) and fuel filler lid/hood lock release handle (1)
from instrument lower panel LH.
Remove data link cover from the instrument lowe ...
© 2014-2026 Copyright t32.nirogue.com