Nissan Rogue Service Manual: Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
| Tool number (TechMate No.) Tool name | Description | |
| 1. KV311039S0
( — )
Charging pipe set 2. KV31103920* ( — ) O-ring |
|
CVT fluid changing and adjustment |
| KV38107900 ( — ) Protector a: 32 mm (1.26 in) dia. |
|
Installing drive shaft |
*: The O-ring as a unit part is set as a SST.
Commercial Service Tools
| Tool number Tool name |
Description | |
| Power tool |
|
Loosening nuts and bolts |
| Lint-free paper |
|
Cleaning transaxle |
| Drift a: 56 mm (2.20 in) dia. b: 50 mm (1.97 in) dia. |
|
Installing differential side oil seal |
| Drift a: 65 mm (2.56 in) dia. b: 60 mm (2.36 in) dia. |
|
Installing converter housing oil seal |
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...
Other materials:
B1428 seat belt buckle switch IH
Description
DTC B1428 SEAT BELT BUCKLE SWITCH LH
The air bag diagnosis sensor unit monitors the seat belt buckle switch LH
status. If the control unit detects an
open or short condition in the circuit, it will set the DTC.
PART LOCATION
Refer to SRC-6, "Component Parts Location".
D ...
C1716, C1717, C1718, C1719 transmitter (pressure data)
DTC Logic
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTC ...
Overdrive control switch
Component Function Check
1.CHECK O/D OFF INDICATOR LAMP FUNCTION
Check O/D OFF indicator lamp turns ON for approx. 2 seconds when ignition
switch turns ON.
Is the inspection results normal?
YES >> GO TO 2.
NO >> Go to TM-181, "Diagnosis Procedure".
2.CHECK OVERDRIVE ...
