Nissan Rogue Service Manual: Preparation
Special Service Tools
The actual shape of the tools may differ from those illustrated here.
|
Tool number (Kent-Moore No.) Tool name |
Description |
|
| (J-44321) Fuel pressure gauge kit |
|
Checks fuel pressure |
| KV10120000 Fuel tube adapter |
|
Measures fuel pressure |
Commercial Service Tools
|
Tool name (Kent-Moore No.) |
Description | |
| Leak detector i.e.: (J-41416) |
|
Locates the EVAP leak |
| EVAP service port adapter i.e.: (J-41413-OBD) |
|
Applies positive pressure through EVAP service port |
| Fuel filler cap adapter i.e.: (MLR-8382) |
|
Checks fuel tank vacuum relief valve opening pressure |
| Socket wrench |
|
Removes and installs engine coolant temperature sensor |
| Oxygen sensor thread cleaner i.e.: (J-43897-18) (J-43897-12) |
|
Reconditions the exhaust system threads before
installing a new oxygen sensor. Use with antiseize
lubricant shown below. a: 18 mm diameter with pitch 1.5 mm for
Zirconia
Oxygen Sensor |
| Anti-seize lubricant i.e.: (PermatexTM 133AR or equivalent meeting MIL specification MIL-A-907) |
|
Lubricates oxygen sensor thread cleaning tool when reconditioning exhaust system threads. |
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...
Other materials:
Replacement operations
Description
This section is prepared for technicians who have attained a high level
of skill and experience in repairing
collision-damaged vehicles and also use modern service tools and equipment.
Persons unfamiliar with body
repair techniques should not attempt to repair collision-dam ...
C119A vacuum sensor
DTC Logic
DTC DETECTION LOGIC
DTC
Display Item
Malfunction detected condition
Possible causes
C119A
VACUUM SEN VOLT
When a malfunction is detected in supply power voltage
of vacuum sensor.
Harness or connector
Vacuum sensor (brake booster)
...
Removal and installation
FRONT COMBINATION LAMP
Exploded View
Front fender
Front combination lamp
Clip
Removal and Installation
REMOVAL
Remove front bumper fascia. Refer to EXT-17, "Removal and
Installation".
Remove front combination lamp bolts and clip.
Pull front combinat ...
