Nissan Rogue Service Manual: Preparation
Special Service Tool
The actual shapes of the tools may differ from those illustrated here.
|
Tool number (TechMate No.) Tool name |
Description |
|
| KV991J0070 (J-45695-A) Coolant refill tool |
|
Refilling engine cooling system |
| — (J-48891) 14 mm spark plug socket |
|
Removing and installing spark plug |
Commercial Service Tool
|
Tool name |
Description |
|
| Power tool |
|
Loosening nuts, screws and bolts |
| — (223-50000) Oil filter wrench assortment |
|
Removing oil filter |
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...
Other materials:
Periodic maintenance
HEADLAMP AIMING ADJUSTMENT
Inspection
PREPARATION BEFORE ADJUSTING
Before performing aiming adjustment, check the following:
Make sure all tires are inflated to correct pressure.
Place vehicle and screen on level surface.
Make sure there is no load in vehicle other than ...
Cluster lid A
Removal and Installation
REMOVAL
Remove instrument lower panel LH. Refer to IP-22, "Removal and
Installation".
Remove instrument finisher A. Refer to IP-15, "INSTRUMENT FINISHER
A : Removal and Installation".
Remove instrument finisher B. Refer to ...
Removal and installation
A/C SWITCH ASSEMBLY
Removal and Installation
REMOVAL
Release the A/C switch assembly clips and pawls using a suitable
tool.
: Metal clip
: Pawl
Disconnect the harness connector from the A/C switch assembly
(1) and remove.
INSTALLATION
Installation is in the reve ...
