Nissan Rogue Service Manual: Operation

Nissan Rogue Service Manual / Engine / Engine Control System / System description / Operation

AUTOMATIC SPEED CONTROL DEVICE (ASCD)

AUTOMATIC SPEED CONTROL DEVICE (ASCD) : Switch Name and Function

SWITCHES AND INDICATORS

Switches and indicators

A On the combination meter
B On the steering wheel
1 CRUISE indicator
2 SET indicator
3 CANCEL switch
4 ACCEL/RES switch
5 COAST/SET switch
6 ASCD MAIN switch

SET SPEED RANGE

ASCD system can be set the following vehicle speed.

Minimum speed (Approx.)	Maximum speed (Approx.)
40 km/h (25 MPH)	144 km/h (90 MPH)

SWITCH OPERATION

Item	Function
CANCEL switch	Cancels the cruise control driving.
ACCEL/RES switch	Resumes the set speed. Increases speed incrementally during cruise control driving.
COAST/SET switch	Sets desired cruise speed. Decreases speed incrementally during cruise control driving.
ASCD MAIN switch	Master switch to activate the ASCD system.

Refer to EC-47, "AUTOMATIC SPEED CONTROL DEVICE (ASCD) : System Description" for ASCD operating instructions.

System

ENGINE CONTROL SYSTEM ENGINE CONTROL SYSTEM : System Description SYSTEM DIAGRAM SYSTEM DESCRIPTION ECM controls the engine by various functions. Function Reference Multipor ...

On board diagnostic (OBD) system

Diagnosis Description This system is an on board diagnostic system that records exhaust emission-related diagnostic information and detects a sensors/actuator-related malfunction. A malfunction is ...

Other materials:

P0711 transmission fluid temperature sensor A
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0711 FLUID TEMP SENSOR A (Transmission Fluid Temperature Sensor A Circuit Range/Performance) When any of 1 or 2 is satisfied: Under the followi ...

Changing a flat tire
If you have a flat tire, follow the instructions below: Stopping the vehicle Safely move the vehicle off the road and away from traffic. Turn on the hazard warning flashers. Park on a level surface and apply the parking brake. Move the shift lever to P (Park). ...

EPS warning lamp does not turn off
Description EPS warning lamp does not turn OFF several seconds after engine started. Diagnosis Procedure 1.PERFORM SELF-DIAGNOSIS With CONSULT Turn the ignition switch OFF to ON. Perform “EPS” self-diagnosis. Is any DTC detected? YES >> Check the DTC. Refer to STC ...