When you walk away from the Nissan Rogue with the Intelligent Key, the vehicle will be locked automatically by the walk away lock function (the operation range is around 7 ft (2 m)). This function is disabled by default, but you can enable it using the vehicle information display.
NOTE:
Approach unlock function
When you approach the Nissan Rogue with the Intelligent Key, the vehicle (all the doors) will unlock automatically by the approach unlock function (the operation range is around 3 ft (1 m)). This function is disabled by default, and you can turn it on through the vehicle information display. When this function is activated, selective unlock is disabled.
NOTE:
If the selective unlock function is activated while the approach unlock function is turned on, the approach unlock function is deactivated automatically.
Once the approach unlock function is activated, the selective unlock function must be reactivated through the vehicle information display if you want to use the selective unlock function. Both may be turned on depending on the model.
Battery saver system
When all of the following conditions are met for a certain period of time, the Nissan Rogue battery saver system will cut off the power supply to help prevent battery discharge.
Warning lights and audible reminders
To help prevent the Nissan Rogue from moving unexpectedly due to incorrect operation of the Intelligent Key as listed in the following chart, or to help prevent the vehicle from being stolen, a chime or beep will sound inside and outside the vehicle and a warning message will appear on the vehicle information display.
When a chime or beep sounds or a warning message appears, check the vehicle and Intelligent Key status carefully.
Intelligent Key operation (models with
request switch)
Troubleshooting guideB terminal circuit
Description
“B” terminal circuit supplies power to charge the battery and to operate the
vehicles electrical system.
Diagnosis Procedure
Regarding Wiring Diagram information. Refer to CHG-7, "Wiring Diagram".
1.CHECK “B” TERMINAL CONNECTION
Turn ignition switch OFF. ...
U1000 CAN COMM circuit
Description
CAN (Controller Area Network) is a serial communication system for real time
application. It is an on-vehicle
multiplex communication system with high data communication speed and excellent
error detection ability.
Many electronic control units are equipped into vehicles, and ea ...
Tire pressure
Tire Pressure Monitoring System (TPMS)
Your Nissan Rogue is equipped with the TPMS, which monitors tire pressure on all wheels except the spare. If the “Tire Pressure Low – Add Air” warning appears, one or more tires are significantly under-inflated.
The TPMS activates only when driving a ...