Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Setting lane sensitivity
Lane sensitivity controls how quickly the Nissan Rogue reacts to lane drift:
- Go to “Settings” → “Driver Assistance”.
- Select “Lane Assist”.
- Choose “Lane Sensitivity”.
- Strong
- Normal
- Mild
NOTE: This setting also affects the Lane Departure Warning feature.
How to enable/disable the I-LI system
Use steering-wheel controls
Open vehicle information display
Use the ProPILOT Assist switch for activation
To adjust I-LI settings on the Nissan Rogue:
Push the
button until “Setting ...
I-LI system limitations
WARNING
The I-LI system is assistance only. It may not detect all lane markers, weather conditions, or road shapes. Relying on it in these cases can be dangerous.
I-LI may activate when changing la ...
Other materials:
P2096, P2097 A/F sensor 1
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P2096
POST CATALYST FUEL TRIM SYS B1
(Post catalyst fuel trim system too lean bank
1)
The output voltage computed by ECM from the A/F sensor 1 s ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
...
Meter control switch signal circuit
Diagnosis Procedure
Regarding Wiring Diagram information, refer to MWI-32, "Wiring Diagram".
1.CHECK METER CONTROL SWITCH SIGNAL
Turn ignition switch ON.
Check voltage between the following terminals of the meter control
switch harness connector M3.
Is the ins ...
