If, due to body size or driving position, you cannot properly fit the lap/shoulder belt in the Nissan Rogue, a compatible seat belt extender can be purchased for use with the existing seat belts.
The extender adds approximately 8 in (200 mm) of extra length and may be used for either the driver or front passenger seating position. It is recommended that you visit a NISSAN dealer for assistance in purchasing an extender if one is needed.
WARNING
Seat belt maintenance
Do not allow the belts to retract until they are fully dry.
If you notice loose parts, deterioration, cuts, fraying or any damage on the webbing, the entire seat belt assembly must be replaced.
Three-point type seat belt with retractor
Child safetyPreparation
Special Service Tool
The actual shape of the tools may differ from those tools illustrated here.
Tool number
(TechMate No.)
Tool nam
Description
—
(J-50190)
Signal Tech II
Activate and display TPMS transmitter IDs
Display tire ...
NISSAN Intelligent Key® (if so equipped)
Replace the battery in the Intelligent Key as follows:
Remove the mechanical key from the Intelligent
Key.
Insert a small screwdriver A into the slit B
of the corner and twist it to separate the
upper part from the lower part. Use a cloth to
protect the casing.
Replace th ...
Service data and specifications (SDS)
Oil Pressure
*: Engine oil temperature at 80°C (176°F)
Oil Pump
Relief Valve
Oil Capacity
...