Basic information

The remote engine start
button is located on the Intelligent Key of the
Nissan Rogue, if equipped. This feature allows you to start the engine from outside
the vehicle, ensuring added comfort during hot or cold weather.
Some systems, including the air conditioning system, may activate automatically during remote engine start if they were previously turned on when the ignition switch was last turned off.
Local regulations may restrict or prohibit idling or the use of remote engine start. Some communities require the vehicle to remain in view when remotely started or limit idle time except during freezing temperatures. Always check local laws before using remote engine start on your Nissan Rogue.
Certain environmental factors can affect the Intelligent Key transmitter and the performance of the remote start function, reducing its effective range or preventing operation.
Remote engine start operating range
WARNING
CAUTION
If the Intelligent Key battery is low or strong radio wave sources are present near the vehicle, the Nissan Rogue may experience reduced operating range or intermittent Intelligent Key function.
The remote engine start feature works only when the Intelligent Key is within the proper operating range.
The maximum remote engine start range for the Nissan Rogue is approximately 197 ft (60 m), depending on environmental conditions.
Remote starting the engine
To start the engine remotely, follow these steps:
1. If the doors are unlocked, press the LOCK
button to secure all doors on your Nissan Rogue.
2. Aim the Intelligent Key toward the vehicle.
3. Press the LOCK
button again.
4. Within 5 seconds, push and hold the remote engine start
button until the turn
signal lights flash and the tail lights illuminate. If your Nissan Rogue is not within
view, push and hold the remote engine start
button for at least 2 seconds.
When the engine of the Nissan Rogue starts, the following will occur:
Press and hold the brake pedal and place the ignition switch in the ON position before driving your Nissan Rogue. For more details, see “Driving the vehicle”.
The vehicle must be driven above 4 MPH (7 km/h) before the remote engine start feature can be used again.
Canceling a remote engine start
To cancel remote engine start on the Nissan Rogue, perform one of the following:
Conditions when remote engine start will not operate
The remote engine start on the Nissan Rogue will not function if any of the following conditions are present:
button is not pressed and held for
at least 2 seconds.
button is not pressed within 5 seconds
after pressing the LOCK
button.
How to use remote keyless entry function
HoodEngine compartment check locations
KR15DDT engine model
Engine coolant reservoir
Engine oil dipstick
Engine oil filler cap
Brake fluid reservoir
Battery
Fuse/fusible link box
Intercooler coolant reservoir
Window washer fluid reservoir
Drive belt
Air cleaner
NOTE:
Your Nissan Rogue may not be equipped with an engine ...
DTC/circuit diagnosis
P1610 LOCK MODE
Description
ECM forcibly switches to the mode that inhibits engine start, when engine
start operation is performed 5 times
or more while communication between ECM and BCM is not normal.
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC B1610 is displayed with DTC U1000, fi ...
Compressor system symptoms
Symptom Table
Follow the next table and perform trouble diagnosis if there is a compressor
unit malfunction (internal noise,
insufficient cooling).
Symptom
Inspection method
Check list
Result
Action
Noise from compressor unit
When A/C is ON.
...