Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Rear-facing child restraint installation using LATCH
For additional information, refer to all Warnings and Cautions in the “Child safety” and “Child restraints” sections before installing a child restraint.
Do not use the lower anchors if the combined weight of the child and the child restraint exceeds 65 lbs (29.5 kg). If the combined weight is greater than 65 lbs (29.5 kg), use the vehicle seat belt (not the lower anchors) to install the child restraint. Always follow the child restraint manufacturer’s installation instructions.
Follow these steps to install a rear-facing child restraint using the LATCH system in the Nissan Rogue:
1. Position the child restraint on the seat.
Always follow the child restraint manufacturer’s instructions.
Rear-facing web-mounted - step 2
2. Secure the child restraint anchor attachments to the LATCH lower anchors. Check to make sure each LATCH attachment is fully and correctly engaged with the lower anchors.
Rear-facing rigid-mounted - step 2
Rear-facing - step 3
3. For child restraints equipped with webbing-mounted attachments, remove any excess slack from the anchor attachments. Press firmly downward and rearward in the center of the child restraint to compress the Nissan Rogue seat cushion and seatback while tightening the webbing of the anchor attachments.
Rear-facing - step 4
4. After attaching the child restraint, test the installation before placing the child in it. Hold the restraint near the LATCH attachment path and push it from side to side. It should not move more than 1 in (25 mm) side to side. Pull it forward to ensure the LATCH attachments hold it firmly. If the restraint is not secure, tighten the LATCH attachments further, or move the restraint to another seating position and test again. You may need to try a different child restraint or install it using the vehicle seat belt (if allowed by the manufacturer).
Not all child restraints fit all vehicles.
5. Before each use, check that the child restraint remains secure. If it is loose, repeat steps 1 through 4.
Lower Anchors and Tethers for CHildren (LATCH) system
LATCH system anchor location
Basic information
Your Nissan Rogue includes special anchor points for LATCH-compatible child restraints. This system may also be called ISOFIX. With LATCH, you do n ...
Rear-facing child restraint installation using the seat belts
WARNING
The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. If the ALR mode is not used, the restraint may not be properly secured and co ...
Other materials:
Washer motor circuit
Diagnosis Procedure
Regarding Wiring Diagram information, refer to WW-22, "Wiring Diagram".
1. CHECK FRONT AND REAR WASHER MOTOR FUSE
Turn the ignition switch OFF.
Check that the following fuse is not blown.
Is the fuse blown?
YES >> Replace the blown fuse ...
Preparation
Special service tool
The actual shapes of techmate tools may differ from those of special service
tools illustrated here.
Tool number
(techmate no.)
Tool name
Description
St33061000
(j-8107-2)
drift
a: 38 mm (1.50 In) dia.
B: 28.5 Mm (1.122 In) dia.
Re ...
Voice commands
Voice commands can be used to operate the
Bluetooth® Hands-Free Phone System. Press
the button and say “Phone” to
bring up the
phone command menu. The available options
are:
Call
Phonebook
Recent Calls
Messaging (if available)
Show Applications ( ...
