Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Ventilation, heater & air conditioner / Heater & Air Conditioning System / Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description
— (J-41425-NIS) Aluminum tube repair kit

Repairing leaks in A/C tube
— (J-38873-A) Drive plate installer

Installing pulley

Commercial Service Tool

(TechMate No.) Tool name

Description
(J-41810-NI) Refrigerant identifier equipment (R- 134a)

For checking refrigerant purity and system contamination
( — ) Power Tool

Loosening nuts, screws and bolts
— (J-48710) NISSAN ACR2009 RRR Unit

Refrigerant recovery, recycling and recharging
— (J-41995) Electronic refrigerant leak detector

Power supply:
  •  DC 12V (battery terminal)
— (J-43926) Refrigerant dye leak detection kit Kit includes:
(J-42220) UV lamp and UV safety goggles
(J-41459) Refrigerant dye injector
(J-41447) Fluorescent leak detection dye (box of 24, 1/4 ounce bottles)
(J-43872) Refrigerant dye cleaner

Power supply:
  •  DC 12V (battery terminal)
— (J-39183-C) Manifold Gauge Set (with hoses and couplers)

Identification:
  •  The gauge face indicates R-134a.

    Fitting size-Thread size

  •  1/2”-16 ACME
Service Hoses:
  •  High side hose (J-39500-72B)
  •  Low side hose (J-39500-72R)
  •  Utility hose (J-39500-72Y)

Hose color:
  •  Low side hose: Blue with black stripe
  •  High side hose: Red with black stripe
  •  Utility hose: Yellow with black stripe or green with black stripe Hose fitting to gauge:
  •  1/2”-16 ACME
Service couplers
  •  High side coupler (J-39500-20A)
  •  Low side coupler (J-39500-24A)

Hose fitting to service hose:
  •  M14 x 1.5 fitting is optional or permanently attached.
— (J-39699) Refrigerant Weight Scale

For measuring of refrigerant Fitting size-Thread size
  •  1/2”-16 ACME
— (J-39649) Vacuum Pump (Including the isolator valve)

Capacity:
  •  Air displacement: 4 CFM
  •  Micron rating: 20 microns
  •  Oil capacity: 482 g (17 oz) Fitting size-Thread size
  •  1/2”-16 ACME
— (J-46534) Trim Tool Set

Removing trim components

Sealant and/or Oil

Tool number (TechMate No.) Tool name

Description
— ( — ) HFC-134a (R-134a) Refrigerant

Container color: Light blue Container marking: HFC-134a (R- 134a) Fitting size: Thread size
  •  large container 1/2”-16 ACME
— ( — ) ND-OIL 8

Type: Nippon Denso Oil 8 (ND-OIL 8) Application: HFC-134a (R-134a)
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
...

Other materials:

EPS warning lamp does not turn off
Description EPS warning lamp does not turn OFF several seconds after engine started. Diagnosis Procedure 1.PERFORM SELF-DIAGNOSIS With CONSULT  Turn the ignition switch OFF to ON.  Perform “EPS” self-diagnosis. Is any DTC detected? YES >> Check the DTC. Refer to STC ...

P0196 EOT sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0196 EOT SENSOR (Engine oil temperature sensor range/performance) A Rationally incorrect voltage from the sensor is sent to ECM, compared ...

P1572 brake pedal position switch
DTC Description DTC DETECTION LOGIC NOTE: This self-diagnosis has the one trip detection logic. When malfunction A is detected, DTC is not stored in ECM memory. And in that case, 1st trip DTC and 1st trip freeze frame data are displayed. 1st trip DTC is erased when ignition switch OFF. And ...

© 2014-2026 Copyright t32.nirogue.com