Nissan Rogue manuals

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Parking brake

Basic information

WARNING

Nissan Rogue. Parking brake

  1. Release
  2. Apply
  3. Indicator light

The electronic parking brake can be applied or released automatically or by operating the parking brake switch, making everyday use in the Nissan Rogue easier and more controlled.

Automatic operation

The electronic parking brake is automatically released as soon as the vehicle starts while the accelerator pedal is depressed under the following conditions.

The electronic parking brake may also release a few seconds after shifting into D or R even if the door is momentarily opened, but it is recommended to keep the door closed before driving your Nissan Rogue.

WARNING

CAUTION

When parking in an area where the outside temperature is below 32ºF (0ºC), the electronic parking brake of the Nissan Rogue may freeze in place and may be difficult to release.

For safe parking, it is recommended that you place the shift position in the P (Park) position and securely block the wheels.

NOTE:

Manual operation

Basic information

To apply: When the vehicle is stopped, pull the parking brake switch up. The system applies even if the ignition is OFF. The indicator and warning lights will illuminate.

To release: With the ignition switch in the ON position, depress the brake pedal and push the parking brake switch down. The indicator light will turn off.

NOTE:

When towing a trailer

Depending on vehicle and trailer weight and slope angle, the Nissan Rogue may roll backward slightly when starting uphill. Use the parking brake switch similarly to a traditional lever to prevent unintended rollback.

Driving the vehicle
Continuously Variable Transmission (CVT) Basic information The CVT in the Nissan Rogue is electronically controlled to deliver smooth, efficient performance. Following the recommended driving proced ...

Automatic brake hold
Basic information The automatic brake hold function keeps the vehicle stopped without requiring the driver to hold the brake pedal. When the accelerator pedal is pressed, the system releases the brake ...

Other materials:

P0335 CKP sensor (POS)
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting conditio P0335 CKP SEN/CIRCUIT (Crankshaft position sensor ″A″ circuit) The crankshaft position sensor (POS) signal is not detected by ...

Power seat switch
Exploded View Seat cushion outer finisher Power seat switch Removal and Installation REMOVAL NOTE: LH shown, RH similar.  Using a suitable tool release clips and remove seat cushion outer finisher (1). : Clip Disconnect harness connector from power seat switch. ...

Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the ...

© 2014-2025 Copyright t32.nirogue.com