Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Memory seat

Basic information

The memory seat system in the Nissan Rogue has the following features:

• Memory storage function
• Entry/exit function

Memory storage function

Two positions for the driver's seat and outside mirrors can be stored in the memory switch. Follow these procedures to use the memory system on your Nissan Rogue.

1. Adjust the driver's seat and outside mirrors to the desired positions by manually operating each adjusting switch.

2. Push the SET switch and, within 5 seconds, push the memory switch (1 or 2).

3. The indicator light for the pushed memory switch will come on and stay on for approximately 5 seconds.

4. The chime will sound if the memory has been stored.

NOTE:

If a new memory position is stored in the same memory switch, the previous memory position will be overwritten by the new stored position.

Confirming memory storage

Push the SET switch. If a memory position has not been stored in the switch (1 or 2) the indicator light for the respective switch will come ON for approximately 0.5 seconds. If a memory position has been stored in the switch (1 or 2) then the indicator light for the respective switch will stay ON for approximately 5 seconds.

Recalling switch memory positions

To recall the manually stored positions, push the memory switch (1 or 2). The driver's seat and the outside mirrors will move to the positions stored in the memory switch.

Linking the profiled user to a stored memory position (models with navigation system)

The profiled user can be linked to a stored memory position with the following procedure.

1. Place the ignition switch in the ON position while carrying the Intelligent Key that was registered to the Nissan Rogue with a user.

NOTE: Make sure the Intelligent Key is far apart. Otherwise, the vehicle may detect the wrong Intelligent Key.

2. Adjust the position of the driver's seat and outside mirrors.

3. Place the ignition switch in the OFF position.

The next time you sign in (selecting the user on the display) after placing the ignition switch in the ON position while carrying the Intelligent Key, the system will automatically adjust to the memorized driving position. (See the separate NissanConnect Owner's Manual for the profiled user settings.)

Linking an Intelligent Key to a stored memory position (models without navigation system) (if so equipped)

Each Intelligent Key can be linked to a stored memory position (memory switch 1 or 2) with the following procedure.

1. Follow steps 1-3 in the "Memory storage function" for storing the memory position.

2. The indicator light for the pushed memory switch will come on. While the indicator light is on for 5 seconds, press the button and the button on the Intelligent Key in succession. The indicator light of the linked memory switch will blink. After the indicator light goes off, the Intelligent Key is linked to that memory setting.

Once it is linked, when ignition switch is placed in the OFF position, pressing the button on the Intelligent Key will move the driver's seat and outside mirrors to the linked memory switch position for your Nissan Rogue.

NOTE:

If a new memory position is stored in the linked memory switch, then the Intelligent Key will link the new position and overwrites the previous position.

Entry/Exit function

This system is designed so that the driver's seat will automatically move when the shift position is in the P (Park) position. This allows the driver to get into and out of the driver's seat of the Nissan Rogue more easily.

The driver's seat will slide backward:

• When the driver's door is opened with the ignition switch placed in the OFF position.
• When the ignition switch is changed from ON to OFF with the driver's door open.

The driver's seat will return to the previous position:

• When the ignition switch is placed in the ON position while the shift position is in the P (Park) position.

The entry/exit function can be canceled through "Vehicle Settings" in the vehicle information display by performing the following:

• Switch the "Exit Seat Slide" from ON to OFF.

System operation

The memory seat system will not work or will stop operating under the following conditions:

• When the vehicle speed is above 4 MPH (7 km/h).
• When any of the memory switches are pushed while the memory seat system is operating.
• When the switch for the driver's seat is pushed while the memory seat system is operating.
• When the seat has already been moved to the memorized position.
• When no seat position is stored in the memory switch.
• When the shift lever is moved from P (Park) to any other position.

© 2014-2025 Copyright t32.nirogue.com