Basic information
Some day-to-day and scheduled maintenance is essential to keep your vehicle, including the Nissan Rogue, in good mechanical condition and maintain proper emissions and engine performance.
It is the owner's responsibility to make sure that scheduled maintenance and general maintenance are performed.
As the vehicle owner, you are the key link ensuring your Nissan Rogue receives the proper maintenance care.
General maintenance
General maintenance includes items that should be checked during normal daily operation. They are crucial for proper vehicle operation. It is your responsibility to perform these procedures regularly as prescribed.
Performing general maintenance checks requires minimal mechanical knowledge and only a few common automotive tools.
These checks can be done by you, a qualified technician or, if you prefer, a NISSAN dealer.
Scheduled maintenance
The maintenance items listed in this section must be serviced at regular intervals. Under severe driving conditions, additional or more frequent maintenance of your Nissan Rogue may be required.
Where to go for service
If maintenance service is required or the vehicle shows signs of malfunction, have the systems inspected. Visiting a NISSAN dealer is recommended.
NISSAN technicians are well-trained, kept up-to-date through service bulletins, technical tips and training programs.
They are fully qualified to work on NISSAN vehicles before any work begins.
If your vehicle is involved in a collision, it is recommended that you ask your NISSAN dealer for the location of the nearest NISSAN Certified Collision Center, or visit http://collision.nissanusa.com.
You can be confident that a NISSAN dealer's service department will properly handle the maintenance needs of your Nissan Rogue.
General maintenanceCylinder block
Exploded View
Cylinder block
Top ring
Second ring
Oil ring
Snap ring
Piston
Connecting rod
Piston pin
Connecting rod bearing
Rear oil seal
Reinforcement plate
Drive plate
Signal plate
Pilot convert ...
Battery
How to Handle Battery
CAUTION:
If it becomes necessary to start the engine with a booster
battery and jumper cables, use a 12-volt
booster battery.
After connecting battery cables, ensure that they are tightly
clamped to battery terminals for good
contact.
Never ...
Front wiper motor
Removal and Installation
REMOVAL
Remove the front drive assembly. Refer to WW-66, "Removal and
Installation".
Remove the bolts (A) from the front wiper drive assembly (1)
and the front wiper motor (2).
Separate the wiper motor (1) from the front wiper drive ...