If any malfunction occurs in the Intelligent 4x4 system while the engine is running, warning messages will appear in the Nissan Rogue vehicle information display.

If the "AWD Error" warning 1 appears, there may be a malfunction in the Intelligent 4x4 system. Reduce vehicle speed and have your Nissan Rogue inspected by a NISSAN dealer as soon as possible.
The "AWD High Temp. Stop vehicle" (high temperature) warning 2 is displayed when the oil temperature in the powertrain rises due to a large difference in wheel rotation (slipping), such as when driving on rough roads, sand, mud, or when attempting to free a stuck vehicle. If this warning appears, stop the vehicle safely and allow the engine to idle. In these cases, the AWD system switches to 2WD to protect powertrain components.
Once the warning turns off, AWD driving can be resumed.
The "Tire Size Incorrect" warning 3 may appear if the front and rear tires differ significantly in size or wear. Stop in a safe area, allow the Nissan Rogue to idle, and check that all tires match in brand, size, construction, and tread pattern. Ensure proper tire pressure and verify that tires are not excessively worn. Adjust or replace tires if needed. Avoid using SNOW or OFF-ROAD modes and do not drive at high speed.
If any warning continues to appear, have your Nissan Rogue inspected by a NISSAN dealer as soon as possible.
WARNING
This could cause drivetrain damage or unexpected vehicle movement, leading to serious damage or injury.
CAUTION
Reduce speed and have the vehicle checked as soon as possible by a NISSAN dealer.
When the Nissan Rogue is in the P (Park) position, operational noises may be heard from the lower part of the vehicle. This is normal and not a malfunction.
Fuel Efficient Driving Tips
Parking/parking on hillsControl cable
Exploded View
Shift selector
Control cable
Retainer grommet
Lock plate
Bracket
Manual lever
Transaxle assembly
Front
Removal and Installation
CAUTION:
Always apply the parking brake before performing removal and installation.
REMOVAL
Apply the parking ...
C1101, C1102, C1103, C1104 wheel sensor
DTC Logic
DTC DETECTION LOGIC
DTC
Display Item
Malfunction detected condition
Possible causes
C1101
RR RH SENSOR-1
When power supply voltage of rear wheel sensor
RH is low.
When an open or shorted circuit is detected in rear
wheel sensor RH ...
Service data and specifications (SDS)
General Specification
GENERAL SPECIFICATIONS
( ): Valve timing control “ON”
Drive belt
Spark Plug
Intake Manifold
Exhaust Manifold
Camshaft
*1: Cam wear limit
*2: Total indicator reading
VALVE LIFTER
VALVE CLEARANCE
*: Approximately 80°C (176°F)
AVAIL ...