WARNING
The top tether strap must be used when installing a forward-facing child restraint with LATCH lower anchors in your Nissan Rogue.
First, secure the child restraint with the lower anchors.
1. Remove the head restraint/headrest and store it in a secure area. Reinstall it after the restraint is removed.
2. Position the top tether strap as shown.
3. Attach the top tether strap to the tether anchor point.
4. Refer back to the child restraint installation steps before tightening the strap fully.
If you have questions about installing a top tether strap, it is recommended to visit a NISSAN dealer for assistance.
Forward-facing child restraint installation
using LATCH
Forward-facing child restraint installation
using the seat beltsBasic inspection
SERVICE INFORMATION FOR ELECTRICAL INCIDENT
Work flow
STEP
DESCRIPTION
STEP 1
Get detailed information about the conditions and the
environment when the incident occurred.
The following are key pieces of information required to make a good
analysis:
WH ...
P0078 EVT control solenoid valve
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condit
P0078
EX V/T ACT/CIRC-B1
(Exhaust valve control solenoid circuit bank
1)
An improper voltage is sent to the ECM through exhaust valve timing
co ...
Floor trim
Exploded View
Rear floor trim (with third row
seat)
Rear floor trim (without third
row seat)
Floor trim hook
Front floor trim
Front floor spacer (RH)
Front floor spacer (LH)
Rear floor spacer (LH)
Rear floor spacer (RH)
Third row floor spacer (LH)
...