Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: I-LI system operation
- I-LI ON indicator
- I-LI intervention indicator
- Vehicle information display
- ProPILOT Assist switch
When the Nissan Rogue approaches a lane boundary, the steering wheel vibrates and the I-LI indicator flashes. If drifting continues, the system briefly applies gentle steering force to help guide the vehicle back toward the lane center. This assistance is momentary and does not replace driver input.
Pressing the ProPILOT Assist button turns the system ON or OFF. The vibration strength can be customized in the settings menu.
Basic information
WARNING
The Intelligent Lane Intervention system on the Nissan Rogue must be used with caution. Ignoring warnings or relying solely on the system may lead to loss of control, injury or death.
I-LI ...
How to enable/disable the I-LI system
Use steering-wheel controls
Open vehicle information display
Use the ProPILOT Assist switch for activation
To adjust I-LI settings on the Nissan Rogue:
Push the
button until “Setting ...
Other materials:
Turn signal switch
Example
Turn signal
Move the lever up or down to indicate a turn. In the Nissan Rogue, the signal will cancel automatically once the turn is completed.
For models equipped with ProPILOT Assist 2.1:
The lever returns to neutral after you move and release it. To cancel the signal, lightly mo ...
Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat
belt
pre-tensioner"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
...
C1130 engine signal
DTC Logic
DTC DETECTION LOGIC
DTC
Display Item
Malfunction detected condition
Possible causes
C1130
ENGINE SIGNAL 1
When a malfunction is detected in ECM system.
ECM
ABS actuator and electric unit
(control unit)
CAN communication l ...
