
Illustration A

Illustration B

Illustration C

Illustration D
WARNING
The following points describe important limitations of the I-FCW system on your Nissan Rogue. Failure to drive in accordance with these limitations could result in serious injury or death.
Make sure you inspect, clean and keep the sensor area clear on a regular basis.

When driving your Nissan Rogue on certain types of roads, such as winding, hilly, sharply curved, narrow roads, or on roads under construction, the radar sensor may detect vehicles in another lane, or may temporarily fail to detect a vehicle traveling ahead. This can cause the I-FCW system to operate inappropriately.
The detection of vehicles by your Nissan Rogue may also be influenced by the way you drive (steering input, lane position, etc.) or by the vehicle’s condition. When this happens, the system may warn you unexpectedly by blinking the vehicle-ahead indicator and sounding the chime.
In all situations, you must manually maintain a safe distance from the vehicle traveling ahead.
Basic information
System temporarily unavailableI-BSI system operation
Side indicator light
I-BSI ON indicator
I-BSI warning indicator
Vehicle information display
ProPILOT Assist switch
The I-BSI system functions above approximately 37 MPH (60 km/h).
If a vehicle enters the detection zone, the side indicator light turns on.
If the turn signal is acti ...
Regulatory Information
FCC Regulatory information
CAUTION: To maintain compliance with
FCC’s RF exposure guidelines, use only the
supplied antenna. Unauthorized antenna,
modification, or attachments could damage
the transmitter and may violate FCC regulations.
Operation is subject to the follow ...
Precaution
Precautions for trouble diagnosis
CAUTION:
Never apply 7.0 V or more to the measurement terminal.
Use a tester with open terminal voltage of 7.0 V or less.
Turn the ignition switch OFF and disconnect the battery cable
from the negative terminal when
checking the harne ...