Nissan Rogue manuals

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: How to use remote keyless entry function

WARNING

CAUTION

The remote keyless entry function allows you to lock and unlock all Nissan Rogue doors using the Intelligent Key. This feature works at a distance of up to approximately 33 ft (10 m), depending on the surrounding environment.

The remote keyless entry function will not operate in the following conditions:

The remote keyless entry function on the Nissan Rogue can also operate the vehicle alarm, providing convenient full-vehicle access and improved security.

Nissan Rogue. Intelligent Key system
Type A (if so equipped)

Nissan Rogue. Intelligent Key system
Type B (if so equipped)

Nissan Rogue. Intelligent Key system
Type C (if so equipped)

  1. LOCK button
  2. UNLOCK button
  3. Power liftgate button
  4. PANIC button
  5. Remote engine start button

When locking or unlocking the Nissan Rogue, the hazard indicator flashes and the horn sounds to confirm the action.

Locking doors

1. Place the ignition switch in the OFF position.

2. Carry the Intelligent Key with you.*

3. Close all doors.

4. Push the LOCK button A on the Intelligent Key.

5. All doors and the liftgate lock instantly.

6. The hazard indicator flashes twice and the horn chirps once.

*: Doors will lock with the Intelligent Key even when the ignition switch is in the ON position.

To ensure the Nissan Rogue is secure, operate the door handles to confirm all doors are locked properly.

Unlocking doors

1. Push the UNLOCK button B once.

2. The hazard indicator flashes once and the driver’s door unlocks.

3. Push the UNLOCK button again within 1 minute.

4. The hazard indicator flashes again and all doors plus the liftgate unlock.

All doors will re-lock automatically within 1 minute unless:

During this interval, pushing UNLOCK again restarts the 1-minute timer before auto-lock activates.

NOTE: The unlocking behavior can be customized using “Selective Unlock” in the Nissan Rogue vehicle settings menu.

Opening/closing liftgate (if so equipped)

1. Press the power liftgate button C for more than 1 second.

2. The liftgate opens automatically, and the outside chime sounds three times.

To close the liftgate, press the same button for more than 1 second.

If the button is pressed while the liftgate is moving, it stops immediately. Pressing the button again reverses its direction. Near the fully open position it will move downward, and near fully closed it will move upward.

Using panic alarm

If you feel threatened or need to draw attention to the Nissan Rogue:

1. Push the PANIC button D for more than 0.5 seconds.

2. The theft warning alarm and the headlights on the Nissan Rogue remain active for 25 seconds.

3. The panic alarm stops when:

Remote engine start (if so equipped)

The remote engine start button E allows you to start the engine of the Nissan Rogue from outside the vehicle for added comfort and convenience.

Nissan Rogue. Intelligent Key system

Intelligent Key button operation light

The indicator light blinks when any button on the Intelligent Key is pressed. This confirms that the Intelligent Key has transmitted a signal. You may still visually or audibly verify that the Nissan Rogue has carried out the intended function.

If the light does not blink, the battery may be too weak to communicate with the vehicle. Replace the battery if needed.

Sleep mode (if so equipped)

Sleep mode temporarily disables door locking/unlocking via the request switch and prevents engine start using the Intelligent Key.

Setting hazard indicator and horn mode

The Nissan Rogue arrives from the factory in Hazard Indicator + Horn mode.

In this mode:

When the LOCK button A is pressed, the hazard indicators flash twice and the horn chirps once.

When the UNLOCK button B is pressed, the hazard indicators flash once.

If you prefer a quieter operation, you may switch the system to Hazard Indicator Only mode.

In Hazard Indicator mode:

When the LOCK button is pressed, the hazard indicators flash twice.

When the UNLOCK button is pressed, neither the horn nor the hazard indicators activate.

Hazard indicator and horn mode:

Nissan Rogue. Intelligent Key system

Hazard indicator mode:

Nissan Rogue. Intelligent Key system

Switching procedure:

To switch between modes, press and hold the LOCK (A) and UNLOCK (B) buttons simultaneously on the Intelligent Key for more than 4 seconds.

Nissan Rogue. Intelligent Key system

The horn operation for the Nissan Rogue can also be turned on or off in the vehicle information display.

Troubleshooting guide
Verify the location of all Intelligent Keys that are programmed for your Nissan Rogue. If another Intelligent Key is within range or inside the vehicle, the system may respond differently than expecte ...

Remote engine start
Basic information The remote engine start button is located on the Intelligent Key of the Nissan Rogue, if equipped. This feature allows you to start the engine from outside the vehicle, ensuring ...

Other materials:

Symptom diagnosis
SQUEAK AND RATTLE TROUBLE DIAGNOSES Work Flow CUSTOMER INTERVIEW Interview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any custome ...

Door sash molding
Exploded View Front door sash molding Rear door rear sash molding Front door panel Rear door panel Roof rail side outer Body side outer Rear door weather strip Rear door glass Removal and Installation FRONT DOOR Removal  Remove door mirror. Refer to MIR-22, &q ...

Timing chain
Exploded View Cylinder block  Timing chain slack guide  Chain tensioner  Timing chain  Camshaft sprocket (EXH)  Camshaft sprocket (INT)  Oil filter  Front cover O-ring  Oil pressure sensor Valve timing control cover O-rings ...

© 2014-2025 Copyright t32.nirogue.com