Basic information
WARNING

Models without 3D view

Models with 3D view
1. Visually check that the parking space is safe before parking your Nissan Rogue, making sure there are no pedestrians, pets or low obstacles.
2. The rear view of the vehicle is displayed on the screen A when the shift lever is moved to the R (Reverse) position.

Models without 3D view

Models with 3D view
3. Slowly back up your Nissan Rogue, adjusting the steering wheel so that the predictive course lines B enter the parking space C.
4. Maneuver the steering wheel to make the vehicle width guide lines D parallel to the parking space C while referring to the predictive course lines for your Nissan Rogue.
5. When the Nissan Rogue is parked in the space completely, place the shift position in the P (Park) position and apply the parking brake.
Difference between predictive and actual distances
How to switch the display (models without
3D view)Component parts
Component Parts Location
Instrument lower panel LH
No.
Component
Function
1
Combination meter
The combination meter transmittes the following signal via CAN
communications
to the TCM.
SPORT mode switch signal
...
Run-flat tires (if so equipped)
Run-flat tires are those tires that can be used
temporarily if they are punctured. For additional
information, refer to “Run-flat tires” in “Maintenance
and do-it-yourself.”
For additional information, refer to the tire safety
information in the Warranty Information Booklet.
WAR ...
Precautions on SRS
This SRS section provides essential safety information for the supplemental restraint systems installed in your Nissan Rogue. These systems are designed to enhance occupant protection when used together with properly worn seat belts.
Driver and front passenger supplemental front-impact air b ...