Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: How to enable/disable the systems
- Steering-wheel controls (left side)
- Vehicle information display
Basic information
The following Nissan Rogue driver assistance features can be toggled on/off using the settings menu.
- AEB with Pedestrian Detection
- Intelligent Forward Collision Warning
- Lane Departure Warning
- Intelligent Lane Intervention*
- Blind Spot Warning
- Intelligent Blind Spot Intervention*
- Steering Assist
- Rear Cross Traffic Alert
- Rear Automatic Braking
- Moving Object Detection
- Sonar system
- Rear Sonar System
- Speed Limit Assist
- Speed Adjust by Route
- Traffic Sign Recognition
- Intelligent Driver Alertness
- Lane Change Assist
- Passing Assist
*: To operate the I-LI and I-BSI systems, the ProPILOT Assist switch must be pressed after each feature is enabled through the settings menu.
Driver Assistance display
The Driver Assistance display appears on the vehicle information screen when selected with the scroll dial or briefly when the ProPILOT Assist switch is pressed (if equipped).
The Nissan Rogue display is divided into zones that show the status of each assistance system.
- When “Warning” systems are active, the
icon appears. - When “Intervention” systems are active, the
icon appears. - If no system is active, “OFF” is displayed.
- A flashing yellow
or 
indicates the feature cannot be used.
The display transitions through several layouts:
All: outline
Forward: outline, Other: shaded
Basic information
The Nissan Rogue offers several Driver Assistance features that support the driver in different situations. Availability depends on vehicle equipment.
Forward Driving Aids
Automatic Emergency Braki ...
Common troubleshooting guide
Basic information
Several Driver Assistance features in the Nissan Rogue rely on shared hardware such as cameras and radar units. When warning messages appear or indicator lights flash, inspect the sy ...
Other materials:
CAN system (type 1)
DTC/CIRCUIT DIAGNOSIS
MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT
Diagnosis Procedure
1.CHECK CONNECTOR
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and
loose connecti ...
Sensor rotor
FRONT SENSOR ROTOR
FRONT SENSOR ROTOR : Removal and Installation - Front Sensor Rotor
The front wheel sensor rotor is an integral part of the wheel hub and bearing
and cannot be disassembled.
Refer to FAX-9, "Removal and Installation" (FWD) or FAX-40, "Removal and
Installatio ...
Diagnosis system (BCM) (with intelligent key system)
COMMON ITEM
COMMON ITEM : CONSULT Function (BCM - COMMON ITEM)
APPLICATION ITEM
CONSULT performs the following functions via CAN communication with BCM.
Direct Diagnostic Mode
Description
Ecu Identification
The BCM part number is displayed.
Self Diagnostic ...
